Sandblasting, grit blasting, abrasive blasting and shot blasting are all terms that are used to describe a process that was invented 155 years ago by Benjamin Chew Tilghman. These terms all use the same principal of using compressed air to propel a given media aginst a work surface to clean it .
Although we are capable of doing all of the forementioned tasks, we concentrate on using a fine media for our work.
99.9% of the work that comes to us needs paint and corrosion removing and we would destroy the metal if we used shot or a heavy grit, so we use the finest media that we can.
We rely instead on the volume of air that we use to propel the media against the work surface, and when there is 400 CFM at up to 160 PSI available at our workshop, we do not need a coarse media and the customer is left with a surface profile that is perfect for the application of primers and paint.
The benefits of having an electronically controlled compressor is that we can use the same system turned down to a few PSI to tackle thin and delicate panels as used in some bodyshells without distressing or warping the metal.
We are often asked if we can “shot blast” a potential customers car, and have to politely tell him that if we did, he would not be happy with the result and explain how we can work on his cherished vehicle.
Thirty five years experience is a huge factor in our ever growing list of repeat customers.
Every job is important to us and every job is done to the best of our ability.
This beautiful Alfa took a bit of time for sandblasting, as paint and underseal hide a multitude of sins.
It is only a small car, but it was overweight with filler and sealant which needed to be removed so that the person restoring it vould see all of the gremlins.
As with all of our sandblasting work, we only do 100%. This means that we do take a bit longer to finish, but the end result is perfection for the client.
The Trafalgar blue primer is applied within 30 minutes of finishing the sandblasting, so that no airbourne moisture is between the paint and the metal. The primer is weld through and will accept any topcoat.